NC Tool Table - LAB

Before proceeding with this step note the relative sizes of the “holes” in the Work Area display on the NC Drill layers (14,15 & 16)


Open NC Tool Table from the Tables pull down menu.


First, set the units to Millimeters. 
(Note that the Size column still indicates Mil – disregard)


Enter the Drill Sizes and Usage into the table. 
Refer to the layer definitions in the Readme text file in the Gerber file directory for drill tool sizes and plating.


Use the Tool Table pull down menu to change between Tables for the 3 Drill layers.


Click OK to exit the NC Tool Table menu.


What does the Work Area display for layers 14 15 & 16 look like now?


Save your work using File/Save.

NC Tool Table - Video

Watch a demonstration of the PADS Drill Macro here:

NC Tool Table

The NC Tool Table contains drill sizes.
Get to the NC tool table from the Tables pull down menu.

There will be a Tool Table that corresponds to each NC Drill layer.
This happens automatically when the files are auto-imported.

In this case there is a table for each layer set. (drill pair).



To enter drill sizes in a table:

1. Select the desired table from the Tool Table pull down menu.
2. Set the units as desired.
3. Enter the drill size in the Size column (Note that the column headingremains as Mils even though millimeters are set as Dialog units).Refer to the Drill Report for the drill tool sizes.
4. Set the Usage checkbox to indicate holes are Plated or Unplated. 
5. Do steps 1 through 3 for each drill set table.

For PowerPCB and Allegro users there are also macros available that will automatically load the Tool Table. The macro will not, however, work with multiple drill sets.

Instead of entering the NC drill sizes manually as described earlier in this section use the Macro pull-down menu to select and run the Pads Drill macro.

The next blog post will demonstrate the use of the Pads drill macro.

Layer Table and Defining Layers

Use the Tables pull down menu or the “y” hotkey to access the Layer Table.

The layer table is used to set the layer Type, and assign Draw and Flash colors. 
It can also be used to set the Active layer (the layer that remains on when all others are turned off) and the Top layer (the layer that redraws last and therefore appears “on top” in the screen display). 


The Data column indicates whether or not the layer contains any data.


(Note that the layer numbers correspond to the numbers in the layer bar.)

Layer types are selected from a pull down menu that is accessed from a cell in Type

column of the layer’s row.

Select the appropriate layer definition from the available options.

Note: 

Whether a plane is positive or negative has nothing to do with its electrical characteristics

but with whether the photo file represents a positive or negative image. “Positive Plane”

layers are processed the same as “Internal” layers

Colors are selected from a chart that pops up by clicking the Draw or Flash cells. 

Color selection is purely a matter of user choice. Try to select familiar draw colors that will help you recognize layers on sight. Choose a different (preferably dark) color for flashes.

In addition to the ability to turn layers On and Off the Layer Table can set a layer to “Ref”

(for reference). In this condition objects on a layer can be viewed but can not be selected.

A video demonstrating Layer Table and Defining Layers will be posted on the next blog post.

Ordering Layers - LAB

From the Edit pull down menu, select Layers/Reorder.

(Note the layer order as it appears in the Active Layer pulldown window.)

On the Reorder Layers popup menu, click on a line item and drag it to a new location in the layer order.

When all layers have been placed in the desired order, click on the Renumber button.

Exit by clicking on the OK button with the LMB.

(Note the layer order as it now appears in the Active Layer pulldown
window.)

Ordering Layers - Video

Here's how ordering layers is done in CAM350:

Ordering Layers

Each Gerber file that has been imported represents a “Layer” of the design. 


If we could see a cross section of the design we would see that each of these layers occupies a unique physical space from top to bottom. Putting the layers in a specific order is more of a user choice issue than an operational requirement. In fact, the order means nothing. It’s simply conducive to the sanity of the user.


From the Edit pull down menu, select Layers/Reorder.

When the Reorder Layers popup menu appears, 

click on a line item and drag it to a new location in the layer order.

Before Reorder

After Reorder

When all layers have been placed in the desired order, click on the Renumber button.

This will assign a new layer number that corresponds to the numbers on the layer bar.

Exit this menu by clicking on the OK button with the LMB.

The next blog will show a demonstration of the Layer Reordering procedure.

Release Highlights for CAM350 Product Version 10.2

Introduction


CAM350 Version 10.2.2 is a support release for CAM350.  CAM350 10.2.2 includes support for  Microsoft Windows 7 and Mentor PADS Layout version 9.2.  Other CAM350 updates include resolutions for customer reported problems concerning ODB++ support for offset pads and flip panels, mill tabs in route arcs and mill route support for flipped images. 


 CAM350 10.2 includes Gerber import improvements for polygon self intersection analysis and DRC analysis accuracy updates for polygon outlines with arcs. 


CAM350 Version 10.1 is a support release for CAM350.  CAM350 10.1 includes performance improvements and memory usage improvements over previous releases of CAM350. Areas of improved performance include Gerber import and ODB++ import.  Optimization for memory usage is delivered in CAM350 10.1 for all polygon analysis, which means that larger more complex layers of polygons can now be processed for commands such as Netlist Extract and Gerber Import. CAM350 10.1 also delivers over 50 important customer reported defect resolutions. 


CAM350 Version 10.0 introduced significant new functionality, including reading and writing BluePrintPCB files, new graphics user interface, a project explorer bar, flip panel support, design compare, Expedition cross probing, and various enhancements. 

New Functionality


The following functional enhancements are contained in CAM350 Version 10.1

• 9 Gerber Import and Export Improvements 
• 9 ODB++ Import Improvements 
• 9 Netlist Extract Updates 
• 9 PADS Import Updates 

Details


Gerber Import and Export Improvements – The File > Import > Gerber Data command has been updated for CAM350 V10.2 to report illegal self intersecting polygons and prompt the user with the option to repair.  


The File > Import > Gerber Data command has been updated for CAM350 V10.1 to include faster polygon processing.  Certain CAD systems generate so-called cutline polygons that are used for efficient flooding and display.  CAM350 reduces these complex shapes into simple outlines with circular or polygonal voids.  The process to analyze the cutline polygons has been optimized.  For certain Gerber designs, import times can improve by up to a factor of 20 times.  This optimization will affect many Mentor Graphics designs. 



The File > Import > Gerber Data and File > Export > Gerber Data commands have been updated to pass arcs in polygon outlines as true arcs, rather than as segmented chords.
This update allows for more accurate Gerber data in CAM350 and allows for smaller Gerber files on export from CAM350. 


ODB++ Import Improvements – The File > Import > ODB++ command has been updated for CAM350 V10.1.  The ODB++ data transfer format is an important standard for the PCB fabrication industry. For CAM350 V10.1, the ODB++ import performance has been improved by up to a factor of 10 times for large designs. The ODB++ import command is also updated for CAM350 V10.1 to support stacked blind and buried vias. Netlist Extract Updates – For CAM350 V10.1, the Utilities > Netlist Extract command has been updated to utilize memory more effectively. Specifically, for large designs, the analysis of complex layers in previous releases of CAM350 could exceed the standard 2 gigabyte limit for processes on Windows 32 bit operating systems.  Parallel programming for layer analysis is now used in CAM350 V10.1 to break through the 2 gigabyte limit.  For large designs, the connectivity analysis for complex layers is performed in separate 2 gigabytes memory pools, separate from the main CAM350 process.  The parallel programming techniques are invoked based on the quantity of data being analyzed. Additionally for CAM350 V10.1, the Utilities > Netlist Extract command has been updated to support complete connectivity analysis of plated drill slots, plated mill slots and all plated mill routes.  The analysis of plated slots and mill routes now enables greater coverage of the final fabrication artwork.  


PADS Import Updates – The File > Import > CAD Data command has been updated to support PADS Layout Version 9.0.  New features include support for importing chamfered and rounded pads from PADS Layout decal definitions.  These new pad definitions coincide with ODB++ intrinsic aperture definitions.  The ODB++ standard names are used for these chamfered and rounded pads.  


Defect Fixes – Over 50 software corrections have been made to previously existing functionality, further improving upon CAM350’s quality and reliability.


Full details of the Release Highlights for CAM350 Product Version 10.2 can be obtained on this link.
http://www.downstreamtech.com/support/support-cam350/CAM350_10/CAM350_10.2.2ReleaseHighlights-Build401.pdf

Introduction to CAM 350

Today’s complex PCB designs require comprehensive verification before they are transferred to the PCB fabricator to ensure a successful and timely manufacture of bare boards. Problems arising during PCB fabrication can drastically impact product schedules, result in costly design re-spins, and require modifications to the design that might compromise the design’s integrity and intent. Inspecting, preparing and validating the PCB design prior to release to manufacturing will result in a significant increase in efficiency, less risk of design re-spin, and, most importantly, successful electronic products, built faster, at less cost.


CAM350 offers a complete suite of tools, from design through fabrication, streamlining the transition of engineering data into successful, physical PCBs.

CAM350 for PCB Designers and Electrical Engineers


CAM350 will import your CAD database or you can choose to import Gerber files. It will then verify that the electrical characteristics match the design intent. Errors can occur in translation such as accidental inclusion of non electrical items in Gerber output or problems with manual separation of voltages on a plane layer. CAM350 will graphically match up original design files with Gerbers to ensure accuracy by locating any disparities.


CAM350 also offers Design Rule Checks (DRC) to verify the Gerber layers match the design rules in your CAD system and the capabilities of your fabricator as well. CAM350's Design for Fabrication (DFF) tools insure the board not only matches manufacturing capabilities, but also searches out design flaws that may affect yields resulting in missed deliveries and delayed product release.


CAM350’s Design for Fabrication (DFF) Analysis pulls fabrication rules into the PCB design domain and presents them in a way that is understood by the PCB designer. DFF Analysis verifies the PCB database to find issues that may cause problems when entering into the fabrication process.


Directly import your design data for true WYSIWYG representation
Analyze, identify, and fix manufacturing flaws that may cause delay
Inspect for etching, soldermask, thermal, and spacing violations
Verify and maintain design integrity and intent
Easy to learn, use and implement

CAM350 for CAM Engineers
CAM350 automates the PCB CAM engineering department by preparing and optimizing the design files for fabrication. Getting designs quickly through fabrication is a very complex process and effectively managing each operation is the key to moving into high-volume production. With a solution for every operation, CAM350 manages data input and preparation, through analysis, test, mill and drill to final bare-board production.


Any complication during fabrication will make the job time consuming and labor intensive, decreasing profitability. CAM350 can safeguard against these setbacks.


When using CAM350, the CAM engineer will accurately prepare, optimize and process the design data. CAM350 will perform an in depth analysis of the data to locate manufacturing violations, it will create optimized mill and drill files, prepare test data, and produce panelization strategies, all resulting in an automated, highly effective process.

• Seek out and repair manufacturability flaws in the design
• Create NC files quickly and accurately
• Optimize the drill and mill machine performance
• Streamline tooling with panelization functionality
• Extract the essential data to drive test equipment
• Optimize test machine performance and probing time
• Identify collisions, break-outs, and un-probable conditions

With the ability to effectively manage each operation while increasing productivity, reducing turn-around time, and ensuring top quality board output, CAM350 is the only solution you need. You can achieve new levels of speed, accuracy, and excellence, the first time around, when it counts the most.