Importing Gerber and Drill Data - LAB

Use File/New to begin a new CAM350 session.

Select File/Import/Auto Import and set a path to the PCB2CAM350/

Gerber directory.

Set the button for Metric, then select Finish. 

Cam350 will automatically select and load the Gerber and NC drill files.

During the loading process a message will pop up warning of “Unassigned Tools. 

This concerns drill sizes which have not yet been set and is normalbehavior.

Note: Because this demonstration board has Blind and Buried vias the

             message pops up 3 times. Once for each drill set.

Experiments:

• What happens when you load the files with set the button set to English?

• What happens when you select Next instead of Finish?

Make sure the Gerber and Drill files are loaded correctly before proceeding.

Use the Settings/Units pull down menu and select Metric.

Use the File/Save As command at this point to open a new CAM350 database for this design. Set the path to your practice area and assign the file a unique name (i.e. don’t use the same name as the Demo files).

Use the CAM_Demo_Offset.CAM file as a reference if you have any questions.

Note: the dot “CAM” file extension denotes a native CAM350 formatted file.

            CAM350 files are Opened using File/Open.